ADA signage involves more than adding Braille to a door sign. The correct requirements depend on the sign’s purpose, location, and the building’s applicable accessibility standards.
The 2010 ADA Standards for Accessible Design and California Building Code Chapter 11B address several important considerations.
Raised Characters & Contracted Braille
Signs identifying applicable permanent rooms and spaces generally require tactile characters accompanied by contracted Grade 2 Braille.
Required tactile lettering must meet specifications for character form, height, depth, and spacing. Braille must also meet prescribed dot dimensions and placement requirements.
Visual Contrast & Non-Glare Finishes
Applicable visual and tactile signs require finishes and contrast that support readability.
Materials and color combinations should be selected with the sign’s required function in mind, not appearance alone.
Installation Height & Door Placement
California’s accessibility standards specify where tactile signs must be installed.
For applicable signs, the 2025 California Building Code requires the baseline of the lowest Braille cells to be at least 48 inches above the finished floor and the baseline of the highest line of raised characters to be no more than 60 inches above it.
Door identification signs are generally positioned beside the latch side, with specified clear floor space for accessible approach. Alternative placement rules apply to certain door arrangements.
Restroom Identification & California Requirements
Restroom signage can involve more than a standard wall plaque.
California also has requirements for geometric identification symbols at applicable toilet and bathing room entrances, in addition to tactile identification requirements.
The correct arrangement depends on the facility and applicable exceptions.
Permanent Identification vs. Directional Signs
Not every interior sign needs Braille.
Signs identifying permanent rooms commonly require tactile identification, while many directional and informational signs are governed by visual-character requirements.
Company logos and decorative branding are generally treated differently from mandatory room identification.
Our Approach: We review each sign’s purpose and installation conditions against the applicable project requirements before developing its design and specifications.